Whirlpool dryer error code AF or F4 E3
Air isn't flowing freely through the dryer. It keeps running, but loads take longer to dry. Some models light Check Vent instead.
We'll check AF against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A clogged lint screen
- A crushed or kinked vent hose
- Lint in the vent or the hood outside
- A vent run that is too long or has too many bends
You can usually clear it
- Touch any key to clear the code.
- Clean the lint screen.
- Check the vent hose from the dryer to the wall isn't crushed or kinked.
- Run the dryer for five to ten minutes and feel the air at the vent hood outside. If it is weaker than a hair dryer on high, the vent needs clearing of lint.
- If the code keeps coming back, have a vent specialist clean the whole vent run.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other Whirlpool dryer codes
L2The dryer is getting low voltage or none on part of its supp…PFA power failure interrupted the cycle.F3 E2Five loads in a row have dried without the moisture sensors …ERRThe door isn't completely closed and latched, so the dryer w…LocControl Lock is on, so the dryer won't start.F1 E3There may be a problem with the control unit or its wiring.F1 E4There may be a problem with the control unit or its wiring.F2 E1A fault in the keypad.
Meaning read from Whirlpool product help: dryer error codes and written in our own words. Last checked 11 November 2026. Maytag's support site lists the same dryer codes. Whirlpool has pages for more codes than are listed here, but those pages give only a reset and don't say what the code means.