Whirlpool dryer error code F1 E3 or F1 E5
There may be a problem with the control unit or its wiring.
We'll check F1 E3 against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A control fault
Needs a technician
Whirlpool says this one needs a technician. It suggests trying this first:
- Touch Power, pick a cycle, then hold Start/Pause to start the dryer. If that doesn't work, unplug the dryer.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
Other Whirlpool dryer codes
AFAir isn't flowing freely through the dryer. It keeps running…L2The dryer is getting low voltage or none on part of its supp…PFA power failure interrupted the cycle.F3 E2Five loads in a row have dried without the moisture sensors …ERRThe door isn't completely closed and latched, so the dryer w…LocControl Lock is on, so the dryer won't start.F1 E4There may be a problem with the control unit or its wiring.F2 E1A fault in the keypad.
Meaning read from Whirlpool product help: dryer error codes and written in our own words. Last checked 11 November 2026. Maytag's support site lists the same dryer codes. Whirlpool has pages for more codes than are listed here, but those pages give only a reset and don't say what the code means.