Whirlpool dryer error code ERR
The door isn't completely closed and latched, so the dryer won't run. It can look shut without being latched.
We'll check ERR against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A door that isn't latched
You can usually clear it
- Push on the door until the latch catches. Some models have an upper and a lower latch.
- Switch the dryer's breakers off for one minute, then on. Start a timed dry cycle and watch for a minute to see if the code returns.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other Whirlpool dryer codes
AFAir isn't flowing freely through the dryer. It keeps running…L2The dryer is getting low voltage or none on part of its supp…PFA power failure interrupted the cycle.F3 E2Five loads in a row have dried without the moisture sensors …LocControl Lock is on, so the dryer won't start.F1 E3There may be a problem with the control unit or its wiring.F1 E4There may be a problem with the control unit or its wiring.F2 E1A fault in the keypad.
Meaning read from Whirlpool product help: dryer error codes and written in our own words. Last checked 11 November 2026. Maytag's support site lists the same dryer codes. Whirlpool has pages for more codes than are listed here, but those pages give only a reset and don't say what the code means.