Whirlpool dryer error code L2 or F4 E4
The dryer is getting low voltage or none on part of its supply, so the heater may not come on. The drum keeps turning.
We'll check L2 against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- One of the dryer's two breakers tripped, or a blown fuse
- No 240-volt supply
- A power cord fitted incorrectly
You can usually clear it
- Touch any pad to clear the code.
- Electric dryers use two breakers. Check that neither has tripped.
- If the code stays, have a qualified electrician check for a 240-volt supply.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other Whirlpool dryer codes
AFAir isn't flowing freely through the dryer. It keeps running…PFA power failure interrupted the cycle.F3 E2Five loads in a row have dried without the moisture sensors …ERRThe door isn't completely closed and latched, so the dryer w…LocControl Lock is on, so the dryer won't start.F1 E3There may be a problem with the control unit or its wiring.F1 E4There may be a problem with the control unit or its wiring.F2 E1A fault in the keypad.
Meaning read from Whirlpool product help: dryer error codes and written in our own words. Last checked 11 November 2026. Maytag's support site lists the same dryer codes. Whirlpool has pages for more codes than are listed here, but those pages give only a reset and don't say what the code means.